Introduction
SiBE811001EB
5
CONVENI-PACK
1. Introduction
Safety Precautions
Before performing design, construction, or maintenance, thoroughly read the "Safety
Precautions" and also the "Installation Manual" and "Operation Manual" that come with this
product.
Precautions are classified as "
WARNING" or "
CAUTION" for the purpose of this Section.
Items that mishandling highly potentially induces serious consequences such as death or serious
injury are specially described under "
WARNING". Furthermore, even items described under
"
CAUTION" potentially induce serious consequences depending on circumstances. All are
important items for safety and must be followed without fail.
After the completion of construction or repair work, conduct test run on the equipment to check it
for any abnormalities, and also explain precautions for use of the equipment to customer.
Pictograms
This symbol alerts you to precautions to be taken.
Sections under this symbol provide the specific descriptions of precautions.
This symbol alerts you to prohibited acts.
Sections under or in the vicinity of this symbol provide the specific
descriptions of prohibited acts.
This symbol alerts you to mandatory acts or instructions.
Sections under or in the vicinity of this symbol provide the specific
descriptions of instructions.
<I. Precautions for Construction and Repair>
WARNING
(1) To overhaul the equipment,
be sure to turn OFF all power
supplies.
(2) If a refrigerant gas belches
during work, do not touch the
refrigerant gas.
Not doing so will result in an electric
shock.
To repair the equipment or check for
circuits with power applied, pay utmost
attention not to touch any live part.
Doing so will result in
frostbite.
(3) To remove a welded part
from the suction or discharge
pipe of compressor, remove
it in a well-ventilated area
after thoroughly discharging
a refrigerant gas.
Not doing so will cause the refrigerant
gas or refrigerant oil to belch, thus
resulting in injury.
(4) If a refrigerant gas leaks
during work, ventilate the
working area.
If the refrigerant gas comes
into contact with a flame,
toxic gas will be generated.
(5) The electrical parts of
outdoor unit carry a high
voltage.
To repair these
parts, thoroughly
discharge
electricity from the
capacitor.
Not doing so will result in an electric
shock.
