SiBE811001EB
Introduction
CONVENI-PACK
6
CAUTION
(6) Do not start or stop the air
conditioner using the POWER
SUPPLY switch.
Doing so may result in a
failure or water leakage.
(7) Do not repair electrical parts
with wet hand.
Doing so may result in an
electric shock.
(8) Do not wash the air
conditioner in water.
Doing so may result in an
electric shock or a fire.
(9) Be sure to establish a ground
for the equipment.
Not doing so may result in
an electric shock.
(10) To clean the equipment, be
sure to set the POWER
SUPPLY switch to "OFF" to
turn OFF all power supplies.
Not doing so may result in injury
because the internal fan rotates at
high speeds.
(11) To dismount the equipment,
pay careful attention not to
tilt it.
Tilting the equipment may
cause water remaining in the
equipment to fall in drops,
thus wetting goods kept in
storage.
(12) Check whether or not the
refrigerating cycle part gets
hot, and then repair the
equipment.
Not doing so may result in a burn.
(13) Use a welder in well-
ventilated areas.
Using the welder in an
enclosed room may result in
lack of oxygen.
<II. Precautions for Equipment after Construction and Repair>
WARNING
(14) To repair the equipment, be
sure to use parts listed in the
List of Service Parts for the
applicable model and proper
tools. Furthermore, NEVER
make any modification to the
equipment.
(15) To install or relocate an air
conditioner, select a location
capable of supporting the
weight of the air conditioner.
The insufficient strength of the
location or improper installation of the
air conditioner will cause the unit to
drop, thus resulting in injury.
Not observing this warning will result
in an electric shock, heat generation,
or a fire.
The insufficient strength of the
location or improper installation of the
air conditioner will cause the unit to
drop, thus resulting in injury.
Not observing this warning will result
in an electric shock, heat generation,
or a fire.
