CHAPTER 28:LCD Controller
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
1081
7.14.
How can I Display/Non-display the LCD with Static Drive (ST0 to ST8)?
This section shows how to display/non-display the LCD with static drive (ST0 to ST8).
When the LCD with static drive (ST0 to ST8) is switched to non-display after reset, set LDR0:ST8 = "0"
and LDR1: ST [7:0] = "00000000", and set the static drive selection port (LCS [3:0]).
The same potential pulses are output from the static drive pins (ST0 to ST8).
When the LCD with static drive (ST0 to ST8) is switched from non-display to display, set LDR0:ST8 and
LDR1: ST [7:0] without change of (LCS [3:0]).
When the LCD with static drive (ST0 to ST8) is switched from display to non-display, set LDR0:ST8 = "0"
and LDR1: ST [7:0] = "00000000" without change of the static drive selection port (LCS [3:0]).
The same potential pulses are output from the static drive pins (ST0 to ST8).
Содержание S6J3200 Series
