Cypress S6J3200 Series, Руководство пользователя

Страница: 322 / 1355

CHAPTER 15:12-/10-/8-bit Analog to Digital Converter
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G 321
5.11.2.
Range Comparator Interrupt Flag Register (ADC12Bn_RCIRQ1)
BIT_OFFSET 31 30 29 28 27 26 25 24
BIT_NAME RCIRQ63 RCIRQ62 RCIRQ61 RCIRQ60 RCIRQ59 RCIRQ58 RCIRQ57 RCIRQ56
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 23 22 21 20 19 18 17 16
BIT_NAME RCIRQ55 RCIRQ54 RCIRQ53 RCIRQ52 RCIRQ51 RCIRQ50 RCIRQ49 RCIRQ48
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 15 14 13 12 11 10 9 8
BIT_NAME RCIRQ47 RCIRQ46 RCIRQ45 RCIRQ44 RCIRQ43 RCIRQ42 RCIRQ41 RCIRQ40
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
BIT_OFFSET 7 6 5 4 3 2 1 0
BIT_NAME RCIRQ39 RCIRQ38 RCIRQ37 RCIRQ36 RCIRQ35 RCIRQ34 RCIRQ33 RCIRQ32
ACCESS_TYPE R,WX R,WX R,WX R,WX R,WX R,WX R,WX R,WX
PROT_TYPE
INITIAL_VALUE 0 0 0 0 0 0 0 0
[bit31:0] RCIRQ63 to 32 : Range Comparator Interrupt flags
Bit Description
0 Range comparator interrupt not detected.
1 Range comparator interrupt detected.
This flag shows that an outside range or inside range condition has been found on the corresponding
logical channel.
This bit is set under the following conditions:
−
The range comparison for this channel is enabled ADC12B_CHCTRL32 to 63.RCEN is set
−
The conversion of the logical channel is just finished
−
An interrupt condition is met (see Table 5-1)
This bit is cleared by writing "1" to the corresponding ADC12B_RCIRQC1.RCIRQC bit.
This bit is identical to the RCIRQ bit in the corresponding ADC12Bn_CHSTAT32 to 63 register.