CHAPTER 22:Media Local Bus Interface (MediaLB)
842
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
[bit7] SSRE : System service request enable
Bit
Description
0
System service request response disabled
1
System service request response enable
System software can set this bit to indicate that the MediaLB Device is present and needs service.
When this bit is set to "1", RxStatus (RxStatus (DeviceServiceRequest(0x82)) is transmitted as a
response to the MlbScan (0xE4) system command.
When RxStatus is transmitted, hardware clears this bit to "0".
[bit6] SDMU : System Detects MediaLB Unlock
Bit
Description
0
MediaLB unlock not detected
1
MediaLB unlock detected
This bit is set to indicate that the MediaLB Device has unlocked from the MediaLB frame.
If not masked by the System Mask Configuration Register (MLBn_SMCR:SMMU), a system interrupt is
generated when MediaLB unlock is detected.
Write "1" to clear this bit. Writing "0" has no effect. Once set, this bit holds until it is cleared by software.
Note:
−
During the locked state, this bit is set to "1" when the MLBn_DCCR:MRS bit is set to "1".
[bit5] SDML : System Detects MediaLB Lock
Bit
Description
0
MediaLB lock not detected
1
MediaLB lock detected
This bit is set to indicate that the MediaLB Device has locked to the MediaLB frame.
If not masked by the System Mask Configuration Register (MLBn_SMCR:SMML), a system interrupt is
generated when the MediaLB lock is detected.
Write "1" to clear this bit. Writing "0" has no effect. Once set, this bit holds until it is cleared by software.
[bit4] SDSC : System Detects Subcommand
Bit
Description
0
Subcommand not detected
1
Subcommand detected
This bit is set to indicate that the MediaLB Device has received the MlbSubCmd (0xE6) System
Command.
The user-defined software command is stored in the MLBn_SDCR register. The decoding of this
command is left up to software.
If not masked by the System Mask Configuration Register (MLBn_SMCR:SMSC), a system interrupt is
generated on detecting MlbSubCmd.
Write "1" to clear this bit. Writing "0" has no effect. Once set, this bit holds until it is cleared by software.
[bit3] SDCS : System Detects Channel Scan
Bit
Description
0
Channel scan is not detected
1
Channel scan is detected
This bit is set to indicate that the MediaLB Device has received the MlbScan (0xE4) System Command.
The target DeviceAddress is stored in the MLBn_SDCR register. If not masked by the System Mask
Содержание S6J3200 Series
