CHAPTER 17:Trigger Configuration of Stepper Motor Controller
406
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
[bit0] TR1 : SMC Trigger 1
This bit triggers the SMC trigger group S1 of SMCTGg. The configuration in SMCTGg_PTRGS:S1x
determines which SMC channels are triggered. The trigger signal starts the delay counters (if enabled
in SMCi_PTRGDL). If the delay has elapsed or the delay is disabled, the Count Enable
(SMCi_PWC:CE) bits of the selected SMC channels will be set and the operation starts (PWM
generation and output control).
Bit
Description
0
No effect
1
Triggers selected SMC channels via the Set logic for SMCi_PWC:CE
Notes:
−
This bit is cleared automatically to "0" after one clock cycle.
−
A second trigger should not be applied to a group which has already been triggered. If this
happens, the running delay counter will reset its value.
Содержание S6J3200 Series
