CHAPTER 14:Serial Programming
246
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
1.
Overview
This chapter describes the FLASH serial programming. Please refer Traveo Platform hardware manual if
necessary.
2.
Memory Map
See the chapter of Memory AND BASE ADDRESS MAP on this hardware manual.
3.
FLASH Sector Configuration
See the chapter of TCFLASH and WORKFLASH of Traveo Platform hardware manual.
4.
Port Configuration
Table 4-1: Port Configuration and Usage
Port Name
Configuration
Remark
MODE
Pull-down
-
RSTX
Reset input
-
X0
Oscillation input
-
X1
Oscillation output
-
P2_27/SIN0
Pull-up: Clock asynchronous mode
Pull-down: Clock synchronous mode
Used for a serial input function after reset
operation.
-
P2_25/SOT0
Pull-up: necessary until reset release.
Used for a serial output function after reset
operation.
-
P2_26/SCK0
Used for synchronous mode.
-
Notes:
−
See the chapter of PORT DESCRIPTION for Port name.
−
See the PIN ASSIGNMENT on Datasheet.
Содержание S6J3200 Series
