background image

TUNNEL MASTER JR MANUAL 

Welcome 1 

 

Welcome 

Welcome, and thank you for purchasing your new Tunnel Master Jr. Car Wash Controller 
from Innovative Control Systems, Inc. 
 
As an ICS customer you benefit from a thoroughly researched car wash controller system. 
This manual, “ICS Car Wash Controller System” has many features, which will enable you, 
the operator, to have an active part in the control and operation of your car wash facility.  

 

Controller Features: 

  24 programmable, fused outputs, upgradeable to 48, each with two independent circuits 

for 24vac and 110vac 

  Programmable relay flashing feature 

  Exclusive, patented anti theft feature to prevent unauthorized processing of car washes 

  Input for Pulse, Gate, Tire, Roller Locator, Entrance Management and Panic circuits 

  Auto pulse feature allows pulse simulation in the event of pulse switch failure 

  Auto Gate feature allows gate switch simulation in the event of gate switch failure 

 Exterior indicators for easy troubleshooting 

  16 programmable service buttons on the entry keypad, upgradeable to 32 

 Automated wet down feature for easy startup  

 Optional report and/or receipt printers 

 

ICS developed this manual in order to: 

  Provide a comprehensive, easy-to-use system reference guide. 

  Enable operators and their employees to obtain the maximum value from the system. 

  Furnish operators with a tool for training their employees on the OEM Car Wash 

Controller. 

 

By reading the information and performing the procedures in this manual you should 
be able to: 

  Install your Tunnel Master Jr. Controller 

  Configure your wash settings and features 

  Process vehicles through your wash 

  View car counts 

  View historical information 

 Track sales 

 Print reports 

  Troubleshoot problems if they occur 

 

Many of the features you will find in the ICS Controller system were integrated at the 
request of current car wash operators.  We welcome your feedback and want to assure you 
that ICS will always remain the best in the industry in car wash controller and management 
systems. 

  

Information in this manual is subject to change without notice.  Companies, names and data used in examples within the manual are 

fictitious unless otherwise noted.  No part of this manual may be reproduced or transmitted in any form or by any means, electronic or 

mechanical, for any purpose without the express written permission of Innovative Control Systems, Inc. 

Содержание Tunnel Master Jr




















































































Отзывы: