ICS Tunnel Master Jr, Руководство пользователя

Страница: 74 / 83

TUNNEL MASTER JR MANUAL
Troubleshooting 74
Entrance Keypad Diagnostics
To test the keypad, there is a diagnostic mode you can put it in to verify its
functionality. Remove the 4 screws and remove the top of the keypad. Flip it over,
you will see the dip switch settings. Turn dip switch 4 on and press the reset
button to the immediate left of the dipswitches. Now, the number LED’s will be
flashing. If you press a number once, it will go solid, if you hit it again, it will shut
off, if you hit it again, it will flash again. Do this for each one of the numbers. The
roller button will be off, if you hit it once, it will turn on, if you hit it again, it will turn
off. If you hit the AC button, it will toggle all of the number keys. If you hit the $
sign or the up arrow, the printer will print, “this is a test…”, every time you hit either
button. If any of these keys do not respond correctly, contact your distributor for a
replacement keypad.