Case 2050M, Руководство оператора, Страница: 81 / 286

3 - CONTROLS AND INSTRUMENTS
RIGHT-HAND SIDE CONTROLS
Dozer blade control lever
The dozer blade control lever (1) is located on the right
hand console. Position (A) FLOAT is the only position
that the lever will remain in without the operator holding
the lever. The blade will stop, and the lever will return to
neutral or the HOLD position in any other position when
the lever is released.
RAPH12DOZ0081AA
1
Float
FLOAT (A) is a detent position. When in the FLOAT po-
sition, the blade can follow the level of the ground without
movement of the control lever.
Lower
Push the control lever forward (B) to LOWER the blade.
The control lever must be held in this position in order to
lower the blade. When the lever is released, it will return
to the HOLD position.
NOTE: A quick drop feature allows the blade to lower
quickly. The further the joystick is moved forward, the
more quickly the blade moves. To activate the quick drop,
move the joystick to the end of blade down stoke before
the float detent feel point.
Raise
Move the control lever back to the RAISE (C) position to
lift the blade. When the control lever is released, it will
return to the neutral or HOLD position.
Hold
The blade will stop moving in the HOLD position. When
released, the control lever will return automatically to the
HOLD position. You must manually move the control
lever from the FLOAT position to the HOLD position.
4742656856
2
RAPH12DOZ0081AA
3
3-33