Case 2050M, Руководство оператора, Страница: 183 / 286

7 - MAINTENANCE
Daily inspection
General
WARNING
Improper operation or service of this machine can result in an accident.
Read and understand the SAFETY INFORMATION Section before you perform any maintenance, ser-
vice, or repairs. Read and understand the specific service procedures for the components you plan
to work with before you start servicing the machine.
Failure to comply could result in death or serious injury.
W0138A
Before starting work, always inspect the machine and service as required.
General
Do the following:
• Check for water or oil leaks.
• Check that all screws and nuts are correctly tightened.
• Wipe off any dust and clean off any accumulated debris (engine, operator's compartment, etc.).
• Check track for tension and pack.
• Check for damage.
Engine
Do the following:
• Check the oil level, and change the oil, if necessary.
• Check the coolant level at overflow tank.
• Check for clogging or damage to the radiator.
• Check the engine accessory drive belt condition.
• Check that air filter restriction warning is not illuminated on console cluster.
• Check for water or oil leaks on the components.
• Check the condition of all lines.
• Check the fuel tank level.
Other
Do the following:
• Check the hydraulic reservoir level.
• Check that the hydraulic oil is clean.
• Check the condition of all lines.
• Check for electrical short-circuits.
• Check that all battery connections are properly tightened.
• Adjust the rear view mirrors.
• Check for oil leaks on the cylinders.
• Check the condition of the blade and ripper (if equipped).
7-27