Case 2050M, Руководство оператора, Страница: 55 / 286

3 - CONTROLS AND INSTRUMENTS
FORWARD CONTROLS
Ignition switch
WARNING
Hazard to bystanders!
Always sound the horn before starting the machine. Make sure the work area is clear of other persons,
domestic animals, tools, etc. before you operate the machine. Never allow anyone in the work area
during machine operation.
Failure to comply could result in death or serious injury.
W0304A
Ignition switch
The ignition switch has four positions:
Accessory position: This position
energizes the drivetrain controller,
accessory switches and instrument
cluster.
Engine stop (OFF position): Turn the key
to STOP in order to stop the engine. After
the engine has stopped, remove the key.
Engine ON (ON position): Turn the key
clockwise to ON and check the warning
lamps. This is the normal position of the
ignition switch when the engine is running.
Engine start (start position): Turn the
key completely clockwise to the START
position to actuate the starter motor. After
the engine starts, release the key. The
switch is spring loaded and will return
automatically to the ON position when
released.
RAPH12DOZ0132AA
1
NOTICE: After engine shutdown, the SCR system will perform a purge cycle which permits the supply module to
continue to run. Do not shut off the master disconnect for 70 seconds after key off.
3-7