Case 2050M, Руководство оператора, Страница: 105 / 286

4 - OPERATING INSTRUCTIONS
Starting the engine
WARNING
IMPROPER OPERATION OF THIS MACHINE CAN CAUSE DEATH OR SERIOUS INJURY.
MAKE SURE THAT EVERY OPERATOR:
-is instructed in the safe and proper use of this machine.
-reads and understands the operator's manual for this machine.
-reads and understands ALL safety signs on the machine.
Failure to comply could result in death or serious injury.
W0188A
WARNING
Equipment failure could cause accident or injury!
Before operating the machine, check for correct operation of steering, brakes, hydraulic controls,
instruments, and safety equipment. Make sure the transmission control lever is in the neutral position.
Make all adjustments before operating the machine.
Failure to comply could result in death or serious injury.
W0204A
WARNING
Hazard to bystanders!
Make sure the area surrounding the machine is clear of all persons before starting the engine.
Failure to comply could result in death or serious injury.
W0090A
Before operating the machine
Before operating this machine, complete the following procedures:
1. Make sure that the fluids and lubricants are suitable for prevailing conditions.
2. Check the level of all fluids (engine oil, fuel, hydraulic fluid, Diesel Exhaust Fluid (DEF) and coolant).
3. Carry out the daily maintenance operations listed on page 7-27 .
4. Inspect the machine, look for any signs of possible leakage, and check the hoses. Tighten or replace as neces-
sary.
5. Complete run-in maintenance if the machine is new or has a reconditioned engine.
6. Check track tension, and check for loose, missing, or broken parts.
7. Clean the steps and hand holds. Grease, oil, mud, or ice in winter on the steps and access handles can cause
accidents. Make sure the steps and hand holds are kept clean at all times.
8. Clean or replace any safety signs that are illegible. See safety signs in Chapter 2.
9. Make sure that the engine access panels and all doors are properly closed and latched.
10. Secure the cab door in either fully closed or fully opened position.
11. Remove any obstructions that hinder visibility. Clean the windshield, the windows, and the rear view mirrors.
12. Check that no tools or other items have been left on the machine or in the operator's compartment.
13. Make sure no one is on or under the machine. The operator must be alone on the machine.
14. Make sure no one is standing in the machine working area.
15. Find out about current safety measures in use on the work site.
16. Work out a convenient means of escape from the machine. Familiarize yourself with the emergency exits in the
event of the cab door being jammed or the machine turning over.
17. Make sure that the lighting and signaling equipment is fully operative before undertaking any travel or work during
hours of darkness.
18. Adjust the seat so that you can comfortably reach the foot pedal when your back is against the seat backrest.
19. Fasten and adjust the seat belt.
20. Check the instrument panel for correct indications with the engine running and at operating temperature.
4-3