Case 2050M, Руководство оператора, Страница: 255 / 286

7 - MAINTENANCE
3. Remove the bolt from the ripper shank cover, and turn
the cover from the detent. Remove the spring and
punch out the bolt.
RAIL13DOZ1268AA
3
Adjusting the ripper shanks
4. Remove the bolt. The plate beneath the bolt has a
detent to hold the pin in place (1) .
5. Drive the pin (2) out, and adjust the shank to the posi-
tion desired.
NOTE: The ripper shanks have a threaded orifice to insert
an I-bolt to aid in lifting. Ripper shanks are heavy. Use
appropriate lifting equipment.
6. Replace the pin and retaining clip.
RAIL13DOZ1268AA
4
Ripper teeth
1. Damaged ripper teeth can be replaced without remov-
ing the ripper shank.
2. Position the ripper teeth slightly above the ground. Re-
move cap and punch out bolt.
3. Clean mating surfaces and replace ripper tooth with a
new component. Replace bolt.
Rear attachment torque values
Ripper
705 - 1165 N·m ( 520.0 - 859.3 lb ft )
Drawbar
705 - 1165 N·m ( 520.0 - 859.3 lb ft )
Hitch
430 - 485 N·m ( 317.2 - 357.7 lb ft )
7-99