manualshive.com logo in svg

Alcatel-Lucent 7750 SR OS, Руководство по настройке интерфейса

"Alcatel-Lucent 7750 SR OS - руководство по настройке интерфейса, доступное для бесплатного скачивания на нашем сайте. Это подробное руководство поможет настроить ваше устройство быстро и эффективно. Скачайте его прямо сейчас с manualshive.com и ознакомьтесь с функционалом продукта."

Поделиться
Скачать
background image

Port Features

Page 42

7750 SR OS Interface Configuration Guide

Configuring MC-MLPPP QoS Parameters

A 4-class MLPPP bundle can be configured with user-defined MLPPP QoS attributes. This feature 
cannot be used with MC-MLPPP bundles with fewer than 4 classes or with non-multiclass 
bundles.

The following describe the parameters and the configuration processes and rules

1. The user creates an ingress QoS profile in the 

mlppp-profile-ingress

 context, to 

configure a preferred value of the ingress per-class re-assembly timer. Ingress QoS 
profile 1 is reserved for the pre-defined profile with parameter values displayed in 

Table 9

. The user is allowed to edit this profile and change parameter values. When a user 

creates a profile with a profile-id greater than 1, or performs the no option command on 
the parameter, the parameter's default value will always be the 1 in 

Table 9

 for ingress 

QoS Profile #1 regardless of the parameter value the edited Profile 1 has at that point 

2. The user creates an egress QoS profile in the 

mlppp-profile-egress

 context to configure 

preferred values for the per-class queue and queue scheduling parameters. The user can 
also configure system forwarding class mapping to the MLPPP classes. Egress QoS 
profiles 1, 2, and 3, are reserved for the pre-defined profiles with parameter values shown 
in 

Table 6

, 

Table 7

, or 

Table 8

. Users can edit these profiles and change parameter values. 

When a user creates a profile with a profile-id higher than 3, or when the user specifies 
the no option command on the parameter, the default value will be the one shown in 

Table 6

, 

Table 7

, or 

Table 8

 for the egress QoS Profile 1. This is regardless of the 

parameter value the edited profiles have at that point in time.

3. A maximum of 128 ingress and 128 egress QoS profiles can be created on the system.
4. The values of the ingress per-class re-assembly timer are configured in the ingress QoS 

profile. 

5. The mapping of the system forwarding classes to the MLPPP Classes are configured in 

the egress QoS profile. There is a many-to-one relationship between the system FC and 
an MLPPP class. See 

Table 6

 for the mapping when one of the three pre-defined 4-class 

egress QoS profiles is selected.

6. The maximum size for each MLPPP class queue in units of msec at the available bundle 

rate is configured in the egress QoS profile. This is referred to as max in 

Figure 6

 and as 

max-queue-size in CLI. The out-of-profile threshold for an MLPPP class queue, referred 
to as oop in 

Figure 6

, is not directly configurable and is set to 50% of the maximum 

queue size rounded up to the nearest higher integer value.

7. The MLPPP class queue scheduling parameters is configured in the egress QoS profile. 

The minimum information rate, referred to as MIR in 

Figure 7

 and mir in CLI, applies to 

Class 1 queue only. The MIR parameter value is entered as a percentage of the available 
bundle rate. The WRR weight, referred to as W1, W2, and W3 in 

Figure 7

 and weight in 

CLI, applies to class 1, class 2, and class 3 queues. Note that W1 in 

Figure 7

 is not 

configurable and is internally set to a value of 1 such that Class 1 queue shares 1% of the 
available bundle rate when the sum of W1, W2, and W3 equals 100. W2 and W3 weights 
are integer values and are user configurable such that Class 2 queue shares  (W2/(W1 + 

Содержание 7750 SR OS





























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 7750 SR OS

Abus TVVR36500 User Manual preview
TVVR36500
Бренд: Abus Страницы: 60
TC Electronic DB6 User Manual preview
DB6
Бренд: TC Electronic Страницы: 174
Fortinet FortiAP S311C Quick Start Manual preview
FortiAP S311C
Бренд: Fortinet Страницы: 20
axing EOC 1-31 Operation Instructions Manual preview
EOC 1-31
Бренд: axing Страницы: 52
Dialogic Media Board D/120JCT-LS-EW Installation Manual preview
Media Board D/120JCT-LS-EW
Бренд: Dialogic Страницы: 2
National Instruments FieldPoint FP-3000 User Manual preview
FieldPoint FP-3000
Бренд: National Instruments Страницы: 118
Lanner NCA-1040 User Manual preview
NCA-1040
Бренд: Lanner Страницы: 59
AirTies Air 4240 User Manual preview
Air 4240
Бренд: AirTies Страницы: 28
G&D DL-DVI-Vision-IP Series Installation And Operation Manual preview
DL-DVI-Vision-IP Series
Бренд: G&D Страницы: 228
Patton DiamondLink 3201 Quick Start Manual preview
DiamondLink 3201
Бренд: Patton Страницы: 12
Fastech Ezi-SERVOII EtherCAT TO User Manual preview
Ezi-SERVOII EtherCAT TO
Бренд: Fastech Страницы: 108
Global411 MS41p1 Quick Installation Manual preview
MS41p1
Бренд: Global411 Страницы: 15
ADIC FCR 200 Operator'S Manual preview
FCR 200
Бренд: ADIC Страницы: 140
Maipu SM3100-9TC-AC Install Manual preview
SM3100-9TC-AC
Бренд: Maipu Страницы: 26
LevelOne NetCon FBR-1409TX User Manual preview
NetCon FBR-1409TX
Бренд: LevelOne Страницы: 88
Hanwha Techwin Wisenet XRN-6410RB2-24TB User Manual preview
Wisenet XRN-6410RB2-24TB
Бренд: Hanwha Techwin Страницы: 124
Genexis FiberTwist XGS2410 Installation Manual preview
FiberTwist XGS2410
Бренд: Genexis Страницы: 7
Lindy Modular Fast Fiber Switch Converter MT-RJ Specifications preview
Modular Fast Fiber Switch Converter MT-RJ
Бренд: Lindy Страницы: 3

Бренды по названию

Популярные бренды

Загрузить еще бренды