manualshive.com logo in svg

Alcatel-Lucent 7750 SR OS, Руководство по настройке интерфейса, Страница: 108 / 444

Поделиться
Скачать
Alcatel-Lucent 7750 SR OS Скачать руководство пользователя страница 108

Configuring Ports

Page 108

7750 SR OS Interface Configuration Guide

the ports active bandwidth will be multiplied by .5, if a value of 150% is given, the active 
bandwidth will be multiplied by 1.5. This capability is independent of named pool mode. The 
ports rate percentage parameters may be modified at any time.

Examples:

1. To modify (in this example, to double) the size of buffer allocated on ingrees for a port:

CLI Syntax:

B:SR7-10# configure port 1/2/1 modify-buffer-allocation-rate 

ing-percentage-of-rate 200

2. To modify (in this example, to double) the size of buffer allocated on ingrees for a 

port:

CLI Syntax:

B:SR7-10# configure port 1/2/1 modify-buffer-allocation-rate 

egr-percentage-of-rate 200 

Named Buffer Pools feature provides a way to customize the port ingress and/or egress buffer 
allocation. The port buffer allocation size and Forwarding class (FC) queue association to the 
buffer pool may be changed.  By mapping each FC to different pools, it is possible to achieve 
separation of available buffers per forwarding class. 

Previous to this feature only the default buffer allocation mode was available, with the following 
characteristics:

•

Each port  manages a buffer according to its active bandwidth (ports with equal active 
bandwidth get the same buffer size)

•

An access port has 2 default pools created: access-ingress and access-egress

•

A network port has 2 default pools created: ingress-MDA (common pool for all ingress 
network ports) and network-egress

•

All queues defined for a port get buffers from the same buffer pool. 

Named Buffer Pools feature offers the following new capabilities:

•

Ability to modify the port bandwidth considered for buffer allocation without changing 
the active port bandwidth.  (modify-buffer-allocation-rate) (ports with equal active 
bandwidth can be configured to get different buffer size)

•

Configure a named pool policy which includes the customized buffer pools 

•

Forwarding class queues are associated with the named pools

•

Pools can be default, MDA common pools, port specific pools.

Содержание 7750 SR OS





























































































































































































































































































































































































































































Отзывы:

Нет отзывов