Alcatel-Lucent 7750 SR OS, Руководство по настройке интерфейса

Страница: 229 / 444

Interface Configuration
7750 SR OS Interface Configuration Guide Page 229
rate — The megabits-per-second parameter specifies a local limit on the total bandwidth for the
weighted scheduling group and overrides any rate defined in the HSMDA scheduler policy for
the weighted scheduling group. The parameter is specified in Megabits per second in a base 10
context. A value of 1 equals a rate of 1000000 bits per second.
The max keyword removes any existing rate limit imposed by the HSMDA scheduler policy for
the weighted scheduling group allowing it to use as much total bandwidth as possible.
Values
1 — 40000, max (Mbps)
max-rate
Syntax max-rate rate
no max-rate
Context config>port>ethernet>hsmda
Description
This command overrides the max-rate parameters configured in the hsmda-scheduler-policy
associated with the egress port or ingress MDA. When a max-rate is defined at the override level, the
HSMDA scheduler policy’s max-rate parameter is ignored.
The hsmda-scheduler-override max-rate command supports a max parameter that allows the
override command to restore the default of not having a rate limit on the port scheduler. This is
helpful when the HSMDA scheduler policy has an explicit maximum rate defined and it is desirable
to remove this limit at the port instance.
The no form of the command removes the maximum rate override from the egress port or the ingress
MDA scheduler context. Once removed, the max-rate parameter from the HSMDA scheduler policy
associated with the port or MDA will be used by the local scheduler context.
Parameters
rate — The rate parameter is mutually exclusive to specifying the max keyword. When executing the
max-rate override command either the keyword max or a rate in megabits-per-second must be
specified.
Values
1 — 40000000, max (Mbps)
max — The max keyword is mutually exclusive to specifying a rate in megabits-per-second. When
executing the max-rate override command either the keyword max or a rate in megabits-per-
second must be specified. The max keyword removes an existing rate limit from the HSMDA
scheduler context.
scheduling-class
Syntax scheduling-class class rate rate
scheduling-class class weight weight-in-group
no scheduling-class class
Context config>port>ethernet>hsmda
Description
This command overrides the maximum rate allowed for a scheduling class or the weight of the class
within a weighted scheduling group. The scheduling-class override cannot be used to change