WIRTGEN KMA 200, Instruction Manual, Page: 206 / 444

OPERATOR GUIDANCE
2.30.01 GB
6 / 6 04.MS *05.05 160344.0004
Examples
Calling up data
Call the required matrix and read the data.
Example:
1 = Daily production
2 = Cement consumption
3 = Water consumption
Entering values
Call the required matrix.
Position the cursor on (+/-) via the left key.
Position the cursor on the required input field
via the upper or lower key.
Press the ENTER key to enable input mode.
Increase or decrease the value in the input field
via the upper or lower key.
Fault-error message
If a fault should occur in an electrical
component, a blinking symbol (?/!) will appear.
Press the ENTER key to receive the respective
text message.
The message will remain until the fault / error
has been rectified.
1
2
3
[4]Weigher auger does not rotate
-Check weigher auger speed
sensor........................