manualshive.com logo in svg

Siemens SIMOTICS S-1FK2, Operating Instructions Manual

Share
Download
Siemens SIMOTICS S-1FK2 Operating Instructions Manual Download Page 84

4.8

Machinery Directive

The basic safety and health requirements specified in Annex I of the Directive must be fulfilled 

for the safety of machines. 
The protective goals must be implemented responsibly to ensure compliance with the Directive.
Manufacturers of a machine must verify that their machine complies with the basic 

requirements. This verification is facilitated by means of harmonized standards.
IEC 61800‑5‑2 Adjustable-speed electrical power drive systems Part 5-2 is relevant for the 

Machinery Directive: Safety requirements - Functional safety
Within the context of IEC 61508, IEC 61800‑5‑2 considers adjustable speed electric power 

drive systems (PDS), which are suitable for use in safety-related applications (PDS(SR)).
IEC 61800‑5‑2 places demands on PDS(SR) as subsystems of a safety-related system. This 

therefore permits the implementation of the electrical/electronic/programmable electronic 

elements of a PDS(SR) taking into account the safety-relevant performance of the safety 

function(s) of a PDS.
Manufacturers and suppliers of PDS(SR) can prove to users (e.g. integrators of control 

systems, developers of machines and plants etc.) the safety-relevant performance of their 

equipment by implementing the specifications stipulated in standard IEC 61800‑5‑2.

Safety functions integrated in the drive
4.8 Machinery Directive

SINAMICS S210 servo drive system

82

Operating Instructions, 12/2017, A5E41702836B AA

Summary of Contents for SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands