Siemens SIMOTICS S-1FK2 Operating Instructions Manual Download Page 256

Page: 256 / 768

r2136[0...63]

Fault removed in days

Data type: Unsigned16

P group: Messages

Description:

Displays the time in days referred to the day when the fault was rectified.

Dependency:

See also: r0945, r0947, r0948, r0949, r2109, r2130, r2133

NOTICE
The time comprises r2136 (days) and r2109 (milliseconds).

Note
The buffer parameters are cyclically updated in the background (refer to status signal in r2139).

r2145[0...63]

Alarm received in days

Data type: Unsigned16

P group: Messages

Description:

Displays the time in days referred to the day that the alarm occurred.

Dependency:

See also: r2122, r2123, r2124, r2125, r2134, r2146

NOTICE
The time comprises r2145 (days) and r2123 (milliseconds).

Note
The buffer parameters are cyclically updated in the background (refer to status signal in r2139).

r2146[0...63]

Alarm removed in days

Data type: Unsigned16

P group: Messages

Description:

Displays the time in days referred to the day when the alarm was cleared.

Dependency:

See also: r2122, r2123, r2124, r2125, r2134, r2145

NOTICE
The time comprises r2146 (days) and r2125 (milliseconds).

Note
The buffer parameters are cyclically updated in the background (refer to status signal in r2139).

p2175[0]

Motor blocked speed threshold

Changeable: T, U

Data type: FloatingPoint32

P group: Messages

Min: 0.00 [rpm]

Max: 210000.00 [rpm]

Def: 120.00 [rpm]

Description:

Sets the speed threshold for the message "Motor locked".
Monitoring is deactivated with p2175 = 0.

Dependency:

Summary of Contents for SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIMOTICS S-1FK2

Reviews:

Brands by name

Popular brands

Siemens SIMOTICS S-1FK2, Operating Instructions Manual

Search results

Summary of Contents for SIMOTICS S-1FK2

Reviews:

Brands by name

Popular brands