manualshive.com logo in svg

Siemens SIMOTICS S-1FK2, Operating Instructions Manual

Share
Download
Siemens SIMOTICS S-1FK2 Operating Instructions Manual Download Page 255

Description:

Displays the time in milliseconds referred to the day that the alarm was resolved.

Dependency:

See also:  r2122, r2123, r2124, r2134, r2145, r2146

NOTICE
The time comprises r2146 (days) and r2125 (milliseconds).

Note
The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
The structure of the alarm buffer and the assignment of the indices is shown in r2122.

r2130[0...63]

Fault received in days

 

Data type: Unsigned16

P group: Messages

 

Description:

Displays the time in days referred to the day that the fault occurred.

Dependency:

See also:  r0945, r0947, r0948, r0949, r2109, r2133, r2136

NOTICE
The time comprises r2130 (days) and r0948 (milliseconds).

Note
The buffer parameters are cyclically updated in the background (refer to status signal in r2139).

r2131

Actual fault number

 

Data type: Unsigned16

P group: Messages

 

Description:

Displays the number of the active fault that occurred last.

Note
0: No fault present.

r2132

Actual alarm value

 

Data type: Unsigned16

P group: Messages

 

Description:

Displays the alarm that last occurred.

Note
0: No alarm present.

r2133[0...63]

Fault value for float values

 

Data type: FloatingPoint32

P group: Messages

 

Description:

Displays the additional information about the fault that occurred for float values.
Refer to the fault for the interpretation of the fault value.

Dependency:

See also:  r0945, r0947, r0948, r0949, r2109, r2130, r2136

Note
The buffer parameters are cyclically updated in the background (refer to status signal in r2139).

r2134[0...63]

Alarm value for float values

 

Data type: FloatingPoint32

P group: Messages

 

Description:

Displays the additional information about the alarm that occurred for float values.
Refer to the alarm for an interpretation of the alarm value.

Dependency:

See also:  r2122, r2123, r2124, r2125, r2145, r2146

Note
The buffer parameters are cyclically updated in the background (refer to status signal in r2139).

Parameters

12.2 List of parameters

SINAMICS S210 servo drive system

Operating Instructions, 12/2017, A5E41702836B AA

253

Summary of Contents for SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands