Siemens SIMOTICS S-1FK2 Operating Instructions Manual Download Page 147

Page: 147 / 768

1. To change the time interval, click in the "Test stop timer" field. An input dialog with the same

name opens.

Set the timer interval here and confirm by clicking "OK".

The remaining time up to the test stop is determined automatically and displayed.

2. Click "Continue".

The "Completion" commissioning step is activated.

6.8.1.6

Commissioning step 5

Completion

You have made all of the settings for commissioning the drive-integrated safety functions. If,

up until now a safety password has not been configured, then it can now be configured in this

step (see the following chapter).
1. Click "Finish".

The following prompt appears. Click "Finish" again to confirm the prompt.

Figure 6-26

Completing the safety commissioning

If both checkmarks are checked, the converter imports the settings of the safety

commissioning and performs a restart when the user clicks "Finish".

After the restart, the commissioning of the drive-integrated safety functions is completed

and the browser once again shows the home page of the web server.

Commissioning and diagnostics in the Web server

6.8 Safety settings

SINAMICS S210 servo drive system

Operating Instructions, 12/2017, A5E41702836B AA

145

Summary of Contents for SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIMOTICS S-1FK2

Reviews:

Brands by name

Popular brands

Siemens SIMOTICS S-1FK2, Operating Instructions Manual

Search results

Summary of Contents for SIMOTICS S-1FK2

Reviews:

Brands by name

Popular brands