manualshive.com logo in svg

Siemens SIMOTICS S-1FK2, Operating Instructions Manual

Share
Download
Siemens SIMOTICS S-1FK2 Operating Instructions Manual Download Page 748

A.3

Directives and standards

A.3.1

Directives, standards and certificates for the converter

Directives and standards that are complied with

The converters comply with the following directives and standards:

European Low-Voltage Directive
The converter fulfills the requirements stipulated in the Low-Voltage Directive 2014/35/EU, if 

they are covered by the field of application of this directive.

European Machinery Directive
The converter fulfills the requirements stipulated in the Machinery Directive 2006/42//EU, if 

they are covered by the field of application of this directive.
However, the use of the converter in a typical machine application has been fully assessed for 

compliance with the main regulations in this directive concerning health and safety.

European EMC Directive
By completely complying with IEC/EN 61800-3, it has been proven that the converter is in 

compliance with directive 2004/108/EC or 2014/30/EU.

Safety Integrated
The converters comply with the requirements relating to functional safety/safety of machinery.

RoHS
The converters comply with directive 2011/65/EU regarding limiting the use of certain 

hazardous substances.

Underwriters Laboratories (North American market)
Converters provided with one of the test symbols displayed on the left fulfill the requirements 

stipulated for the North American market as a component of drive applications, and are 

appropriately listed.

Eurasian conformity
The converter complies with the requirements of the Russia/Belarus/Kazakhstan customs 

union (EAC).

Australia and New Zealand (RCM formerly C-Tick)
The converters showing the test symbols fulfill the EMC requirements for Australia and New 

Zealand.

Appendix
A.3 Directives and standards

SINAMICS S210 servo drive system

746

Operating Instructions, 12/2017, A5E41702836B AA

Summary of Contents for SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands