manualshive.com logo in svg

Siemens SIMOTICS S-1FK2, Operating Instructions Manual

Share
Download
Siemens SIMOTICS S-1FK2 Operating Instructions Manual Download Page 162

6.11.3

Configuring the system time

Per default, an NTP time synchronization (NTP = Network Time Protocol) is activated for the 

system time of the converter. The converter then synchronizes its system time with a central 

NTP server in the PROFINET network. 
A library for use as SNTP server is available for the SIMATIC controllers. You will find these 

on the Support pages: 
Library for the SNTP server functionality in SIMATIC S7 CPUs (

https://

support.industry.siemens.com/cs/ww/en/view/82203451

)

Note
If the NTP server cannot be accessed for more than 10 minutes when NTP time 

synchronization is activated, alarm A01097 "NPT server cannot be accessed" appears.

If you want to deactivate this time synchronization or activate it again, proceed as follows: 
1. Select "System" and "Settings" in the navigation.
2. Select the "Drive System Time and Date" tab. 

Figure 6-36

System time

3. Deactivate/activate "Activate NTP time synchronization". 
4. Click "Apply Settings" to save the changes in the RAM of the device. 
5. Click 

 to save the data permanently. 

Commissioning and diagnostics in the Web server
6.11 System settings

SINAMICS S210 servo drive system

160

Operating Instructions, 12/2017, A5E41702836B AA

Summary of Contents for SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands