manualshive.com logo in svg

Siemens SIMOTICS S-1FK2, Operating Instructions Manual

Share
Download
Siemens SIMOTICS S-1FK2 Operating Instructions Manual Download Page 585

Acknowl. upon A: NONE

A31700

Encoder 1: Functional safety monitoring initiated

Message value:

Fault cause: %1 bin

Drive object:

All objects

Reaction:

NONE

Acknowledge:

NONE

Cause:

Functional safety was activated. Self-test of the DRIVE-CLiQ encoder has detected a fault.
Alarm value (r2124, interpret binary):
Bit x = 1: Effectivity test x unsuccessful.

Remedy:

Replace encoder.

N31800 (F)

Encoder 1: Group signal

Message value:

-

Drive object:

All objects

Reaction:

Servo: ENCODER (IASC/DCBRK, NONE)

Acknowledge:

NONE

Cause:

The motor encoder has detected at least one fault.

Remedy:

Evaluate the other messages that are presently available.

Reaction upon F: Servo: ENCODER (IASC/DCBRK, NONE)
Acknowl. upon F: IMMEDIATELY

F31801 (N, A) Encoder 1 DRIVE-CLiQ: Sign-of-life missing

Message value:

Component number: %1, fault cause: %2

Drive object:

All objects

Reaction:

Servo: ENCODER (IASC/DCBRK, NONE)

Acknowledge:

IMMEDIATELY

Cause:

A DRIVE-CLiQ communication error has occurred from the Control Unit to the encoder involved.
Fault cause:
10 (= 0A hex):
The sign-of-life bit in the receive telegram is not set.
Note regarding the message value:
The individual information is coded as follows in the message value (r0949/r2124):
0000yyxx hex: yy = component number, xx = error cause

Remedy:

- check the electrical cabinet design and cable routing for EMC compliance
- replace the component involved.

Reaction upon N: NONE
Acknowl. upon N: NONE
Reaction upon A: NONE
Acknowl. upon A: NONE

F31802 (N, A) Encoder 1: Time slice overflow

Message value:

%1

Drive object:

All objects

Reaction:

Servo: ENCODER (IASC/DCBRK, NONE)

Acknowledge:

IMMEDIATELY

Faults and alarms

13.2 List of faults and alarms

SINAMICS S210 servo drive system

Operating Instructions, 12/2017, A5E41702836B AA

583

Summary of Contents for SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands