Rohde & Schwarz SMBV100A, Operating Manual

Page: 698 / 911

Remote Control Commands
R&S
®
SMBV100A
683 Operating Manual 1176.8016.02 ─ 17
Manual operation: See "Load User Mapping" on page 357
[:SOURce<hw>]:BB:DM:MLISt:POINts?
Queries the user modulation mapping list length.
Return values:
<Points> integer
Range:
0 to INT_MAX
*RST: 0
Example:
BB:DM:FORM USER
selects the User modulation type.
BB:DM:MLIS:POIN?
queries the list length.
Usage: Query only
[:SOURce<hw>]:BB:DM:MLISt:SELect <Filename>
Selects the user mapping list in the default directory. The default directory is set using
command
MMEM:CDIRectory
. A path can also be specified, in which case the files in
the specified directory are selected. If a user mapping list with the specified name does
not yet exist, it is created. The file extension may be omitted. Only files with the file
extension
*.vam
will be selected or created.
Parameters:
<Filename> string
Example: BB:DM:MLIS:SEL 'c_list1'
selects the user mapping list
c_list1
.
Manual operation: See "Load User Mapping" on page 357
[:SOURce<hw>]:BB:DM:SETTing:CATalog?
Reads out the files with Custom Digital Modulation settings in the default directory. The
default directory is set using command
MMEM:CDIRectory
. Only files with the file
extension
*.dm
will be listed.
Return values:
<Catalog> string
Example: MMEM:CDIR '/var/user/dig_mod'
sets the default directory.
BB:DM:SETT:CAT?
reads out all the files with Custom Digital Modulation settings in
the default directory.
Response:
'DM_1'
the file
DM_1
with Custom Digital Modulation settings is availa-
ble.
SOURce Subsystem