manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Operating Manual

Share
Download
Rohde & Schwarz SMBV100A Operating Manual Download Page 372

Instrument Function

R&S

®

SMBV100A

357

Operating Manual 1176.8016.02 ─ 17

The menu offers only the coding settings that are permissible for the chosen modula-
tion type. The other coding methods are grayed out.

If the system is subsequently switched to a modulation type for which the selected cod-
ing is not available, coding is automatically set to OFF.

Remote command: 

[:SOURce<hw>]:BB:DM:CODing

 

on page 668

Modulation

The modulation type is set in the "Modulation section". The parameters offered depend
on what is currently selected. The "More..." button opens a submenu for displaying the
user-defined mapping.

Modulation Type

Selects a modulation type.

The associated symbol mapping is displayed in the "More..." submenu (see 

Chap-

ter 5.9.3.2, "Modulation Types - Custom Digital Mod"

, 

on page 338).

If the "coding" that is set is not possible with the chosen modulation type, "coding" is
set to "Off".

For selection "Variable FSK", the deviation of each symbol can be set in the "More..."
submenu.

Remote command: 

[:SOURce<hw>]:BB:DM:FORMat

 

on page 669

Load User Mapping

Selects user defined mapping table. This opens the "Select List File User Mapping"
window in which the mapping table can be selected (see 

"User Mapping"

on page 342). The button is only available if modulation type "USER" is selected.

The button "File Manager" calls the "File Manager" menu. The "File" "Manager" menu
is used to display and delete files.

Remote command: 

[:SOURce<hw>]:BB:DM:MLISt:SELect

 

on page 683

[:SOURce<hw>]:BB:DM:MLISt:CATalog?

 

on page 675

[:SOURce<hw>]:BB:DM:MLISt:DELete

 

on page 682

ASK Depth

Sets the modulation depth m for ASK modulation.

m = (Amplitude

max

-Amplitude

min

) / (Amplitude

max

+Amplitude

min

)

Remote command: 

[:SOURce<hw>]:BB:DM:ASK:DEPTh

 

on page 668

FSK Deviation

Sets the frequency deviation for FSK modulation. The range of values depends on the
chosen symbol rate (see data sheet).

Whenever "MSK" is selected, the deviation corresponds to 1/4 of the symbol rate and
cannot be set.

Baseband Signal - Baseband Block

Summary of Contents for SMBV100A
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands