manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Operating Manual

Share
Download
Rohde & Schwarz SMBV100A Operating Manual Download Page 429

Instrument Function

R&S

®

SMBV100A

414

Operating Manual 1176.8016.02 ─ 17

Multi Segment File Contents

The upper part of the dialog provides the functions, necessary to create and adjust the
contents of the multi segment file.

Multi Segment Table

The table lists the individual waveforms (segments) of the selected multi segment
waveform. The information about the segments is taken from the tags of the corre-
sponding waveform files.

"Segment#"

Indication of segment index. The segment index is used to select the
segment to be output.
The segment index also defines the sequence of the output during
triggering in the "Next Segment" or "Next Segment Seamless".

"Waveform"

Indication of the waveform file name of the segment.

"Clock Rate"

Indication of the clock rate of the segment.

"Samples"

Indication of the number of samples in the segment.

"Period"

Indication of the segment duration.

"Path"

Indication of the location of the waveform file used for the corre-
sponding segment.

"Comment"

Indication of the comment on the segment.

"Info"

Opens a dialog with detailed information about the currently selected
waveform.

Remote command: 
n.a.

Append

Opens the file menu to enter the file name of the waveform file to be appended.

Remote command: 

[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:CATalog?

on page 644

[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:APPend

on page 644

Delete

Deletes the selected segment.

Baseband Signal - Baseband Block

Summary of Contents for SMBV100A
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands