manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Operating Manual

Share
Download
Rohde & Schwarz SMBV100A Operating Manual Download Page 143

Instrument Function

R&S

®

SMBV100A

128

Operating Manual 1176.8016.02 ─ 17

Device ID

Displays the instrument specific identification number. The device ID is an unique
string with the following structure:

<stock number>-<serial number>-<checksum>

Enter License Key

Type here the license key provided with the option.

For license keys delivered as a file, use 

Import License Key from File...

.

Import License Key from File...

Opens a dialog for selecting the file with the license key.

Use this function also to import the deactivation key file generated by the R&S License
Manager online tool (see 

Example "Moving a portable license"

 

on page 125).

Export Deactivation Response to File...

Exports the generated deactivation response key to a file and opens a file manage-
ment dialog to save the file. This key is required during the unregistration process.

In case the unregistered option is a portable one, it can be afterwards registered at
another instrument (see 

Example "Moving a portable license"

 

on page 125).

Status Information

Displays status information.

Show Inactive Licenses

Enables/disables the display of the inactive (expire) licenses in the 

License Table

.

Show Deactivated Licenses

Enables/disables the display of the deactivated licenses in the 

License Table

.

See 

Example "Moving a portable license"

 

on page 125 for information on how to acti-

vate deactivated licenses.

Manage Waveform Packages

Opens the "Manages Waveform Packages" dialog.

The waveform packages licenses are provided for the registration of waveforms. This
kind of licences enables the instrument to play registered waveform file generated with
the software R&S WinIQSIM2 even if the instrument is not equipped with the corre-
sponding software option R&S

 

SMBV-Kxy/-K2xy.

General Instrument Settings

Summary of Contents for SMBV100A
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands