manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Operating Manual

Share
Download
Rohde & Schwarz SMBV100A Operating Manual Download Page 184

Instrument Function

R&S

®

SMBV100A

169

Operating Manual 1176.8016.02 ─ 17

See also 

Mapping a Network Folder

.

Network Folder

Enter the path of the folder or computer, e.g. 

//<IP Address>/share

or 

//<server name>/share

.

Local Folder

Enter a letter or a alias name to describe the folder.

In the directory tree, a mapped network folder is indicated as 

/shares/

<"Local Folder">

.

User Name

Enter a user name of a user that has the permission to access the selected network
folder.

Password

Enter the password of the selected user.

Reconnect at Startup

Enables reconnecting every time you start up the instrument.

Connect

Triggers the instrument to prove the credential and to map (i.e. connect) the selected
network folder or computer to the instrument.

You can map up to 10 network folders.

Change

Applies the changes.

Disconnect

Disconnects the network drive.

5.2.8.7

Mapping a Network Folder

Possibly you would like to transfer instrument or user settings to another R&S

 

SMBV,

distribute waveform files to several instruments or you have to access frequently the

 

General Instrument Settings

Summary of Contents for SMBV100A
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands