manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Operating Manual

Share
Download
Rohde & Schwarz SMBV100A Operating Manual Download Page 696

Remote Control Commands

R&S

®

SMBV100A

681

Operating Manual 1176.8016.02 ─ 17

Parameters:

<Points>

integer
Range: 

0  to  INT_MAX

*RST: 

0

Example: 

BB:DM:DLIS:POIN 234

defines the number of bits in the data list to be utilized as 234
bits. If the list was filled with block data, at least the last 6 bits
will be ignored.

[:SOURce<hw>]:BB:DM:DLISt:SELect 

<Select>

The command selects the data list in the default directory. The default directory is set
using command 

MMEM:CDIRectory

. A path can also be specified, in which case the

files in the specified directory are selected. If a data list with the specified name does
not yet exist, it is created. The file extension may be omitted. Only files with the file
extension 

*.dm_iqd

 will be selected or created.

The modulation data in this data list is used when the data source is selected using the
command 

SOURce:BB:DM:SOURce DLISt

.

Parameters:

<Select>

<list name>

Example: 

BB:DM:DLIS:SEL 'd_list2'

selects data list 

d_list2

.

Manual operation: 

See 

"Functions for handling of data lists"

 

on page 166

[:SOURce<hw>]:BB:DM:FLISt:DELete 

<Filename>

Deletes the secified user filter file. The default directory is set using command

MMEM:CDIRectory

. A path can also be specified, in which case the files in the speci-

fied directory are read. The file extension may be omitted. Only files with the file exten-
sion 

*.vaf

*.vaf will be deleted.

Setting parameters: 

<Filename>

string

Example: 

BB:DM:FILT:TYPE USER

selects the User filter type.

MMEM:CDIR '/var/user/Filter_List'

sets the default directory for the user-defined filters.

BB:DM:FLIS:DEL user_filter3

deletes the user-defined filter.

Usage: 

Setting only

Manual operation: 

See 

"Load User Filter"

 

on page 361

SOURce Subsystem

Summary of Contents for SMBV100A
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands