Remote Control Commands
R&S
®
SMBV100A
563
Operating Manual 1176.8016.02 ─ 17
should be avoided since they are used in file paths. A number of names are reserved
for the operating system, e.g.
CLOCK$
,
CON
,
AUX
,
COM1...COM4
,
LPT1...LPT3
,
NUL
and
PRN
.
In the R&S
SMBV all files in which lists and settings are stored are given a characteris-
tic extension. The extension is separated from the actual file name by a dot (see
ter 4.7.2.1, "Extensions for User Files"
on page 109 for an overview of the file types).
The two characters "*" and "?" function as "wildcards", meaning they are used for
selecting several files. The "?" character represents exactly one character, while the "*"
character represents all characters up to the end of the file name. "*.*" therefore stands
for all files in a directory.
When used in conjunction with the commands, the parameter
<file_name>
is speci-
fied as a string parameter with quotation marks. It can contain either the complete path
including the drive, only the path and the file name, or only the file name. The file name
must include the file extension. The same applies for the parameters
<directory_name>
and
<path>
.
Depending on how much information is provided, either the values specified in the
parameter or the values specified with the command
MMEM:CDIR
(default directory)
are used for the path and the drive settings in the commands.
Before the instrument settings can be stored in a file, they have to be stored in an inter-
mediate memory using common command
*SAV <number>
. The specified number is
subsequently to loading a file with instrument settings with command
on page 573, these settings have to be activated with the common
command
*RCL <number>
.
7.13.2 Extensions for User Files
The following table lists all available file extensions for user files. The currently availa-
ble files on the instrument depend on the installed options.
Table 7-1: List of the automatically assigned file extensions in the instrument
Function/Digital
Standard
List type
Contents
File suffix
Instrument State
Settings
Instrument settings
*.savrcltxt
"User Correction"
List
User-defined level correction values
*.uco
"List Mode"
List
User-defined frequency/level value pairs
*.lsw
"Frequency
Response Correc-
tion"
Settings
User-defined frequency response correction file
*.frc
"Arbitrary Wave-
form Generator"
Waveform
ARB waveforms
ARB multi segment waveforms
*.wv
Waveform
ARB multi carrier settings
*.arb_multcarr
MMEMory Subsystem
