manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Operating Manual

Share
Download
Rohde & Schwarz SMBV100A Operating Manual Download Page 435

Instrument Function

R&S

®

SMBV100A

420

Operating Manual 1176.8016.02 ─ 17

Sequencing List

Displays the name of the selected sequencing list file, i.e. the file with the “play list” set-
tings.

The sequencing list file has an extension 

*.wvs

 and is automatically assigned to but

independent from the multi segment file. By default, both files have the same name
and are located in the same file directory. More than one sequencing list files can be
created per multi segment waveform file.

The sequencing list file carries information only about the segment number, the corre-
sponding wavefile names are retrieved form the assigned multi segment waveform file,
i.e. the same sequencing list file can be reused for different multi segment waveform
files with the same number of segments.

Changes and re-calculations of a multi segment waveform file cause a re-check
whether the assigned sequencing list files are still valid. A message is displayed to
inform about necessary corrections in the “play list”.

Remote command: 
n.a.

Assigned to Multi Seg. Waveform

Displays the name of the multi segment waveform file the current sequencing list file is
assigned to.

Remote command: 
n.a.

Sequencing Play List

The "Sequencing Play List" table is used to define the sequence in which the waveform
file segments are processed and how many times each of them is repeated.

Id# ← Sequencing Play List

Indication of the row number.

n.a.

State ← Sequencing Play List

Enables/disables the selected row. Only active segments are processed.

n.a.

Segment# ← Sequencing Play List

Indication of segment index.

The sequencing list file carries information only about the segment index, the corre-
sponding wavefile names are retrieved form the assigned multi segment waveform file.

n.a.

Waveform ← Sequencing Play List

Indication of the waveform file name of the segment. The file name is retrieved form
the assigned multi segment waveform file.

Available for selection are only waveform files from the pool of segments of the
selected multi segment waveform file.

Baseband Signal - Baseband Block

Summary of Contents for SMBV100A
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands