manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Operating Manual

Share
Download
Rohde & Schwarz SMBV100A Operating Manual Download Page 147

Instrument Function

R&S

®

SMBV100A

132

Operating Manual 1176.8016.02 ─ 17

2. Execute the "Delete Temporary Files" function.

The content of the predefined directory is deleted.

Another way to achieve more free disc space on the internal flash memory is to exe-
cute the 

Factory Preset

 function.

This function removes all temporary files, too, but also resets several parameters to
their factory values.

SCPI command:

:SYSTem:FILes:TEMPorary:DELete

 

on page 833

5.2.3.7

Display Update

The "Start/Stop Display Update" dialog provides the possibility to switch off update of
the displayed parameters in order to increase speed for certain settings.

The indicated values are not updated and may therefore differ from the intern, used
values.

Display Update is On/Off

Switches on/off update of the displayed parameters.

Switching off the update of the displayed parameters increases the speed for certain
settings.

Note: 

For optimum sweep performance with short dwell times and for fast settling

times, it is recommended to switch off the display update .

Remote command: 

:SYSTem:DISPlay:UPDate

 

on page 837

5.2.3.8

Selftest

A selftest is provided for service purposes.

 

 

General Instrument Settings

Summary of Contents for SMBV100A
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands