Instrument Function
R&S
®
SMBV100A
424
Operating Manual 1176.8016.02 ─ 17
User Interface
To access the "Multi Carrier" dialog, select "Baseband > ARB > Multi Carrier...".
The menu can be used to create a multi carrier waveform and save it under its own
name. As with normal waveforms, the file extension is
*.wv
. Information on clock rate,
number of samples and creation day is displayed in the File menu when a waveform is
loaded.
The "Multi Carrier" dialog is divided into the following sections.
The upper part of the menu is used for calling the default settings and saving and
recalling the submenu settings.
The General Settings section is used to configure the main multi carrier waveform.
The buttons in the middle part of the menu open submenus for defining the carrier
table. The carrier settings can be checked in the graphical "Carrier Graph" submenu.
The "Output Settings" section indicates the name, the size and the clock rate of the
multi carrier waveform (after calculation).
The buttons in the lower part of the menu activate creation and optionally loading of
multi carrier waveform files into the main ARB menu.
Default Settings and State
The upper part of the dialog is used for calling the default settings and saving and
recalling existing ARB multi carrier submenu settings.
Set to Default
Calls default settings. The values are shown in the following table.
Baseband Signal - Baseband Block
