Omron CS1W-NC113 - REV 02-2008, Manual

Page: 302 / 350

11-5 Section Error Code Lists
292
Item Operation after
error
Clearing
method
Cause Code Name
Origin search Origin detection
method error
1607 Even though the axis parameters’ origin
search operation is set for other than
single-direction mode, the origin
detection method setting is not 0, 1, or 2.
Transfer the
data again after
checking and
correcting it.
When this error
occurs during
data transfer, all
data (including
Backlash
compensation
Backlash
compensation
error
1700 The axis parameters’ backlash
compensation setting is outside the
settable range (0 to 9,999pulses).
g ( g
the data with the
error) specified
for transfer will
be lost
Backlash
compensation
speed error
1710 The axis parameters’ backlash
compensation speed setting exceeds the
maximum speed setting.
be lost.
All operating
axes will be
decelerated to a
Software
limits
CW software
limit error
1800 The axis parameters’ CW software limit
setting is outside the settable range
(--1,073,741,823 to 1,073,741,823).
decelerated to a
stop.
CCW software
limit error
1801 The axis parameters’ CCW software limit
setting is outside the settable range
(--1,073,741,823 to 1,073,741,823).
Zones
Zone 0 CW
error
1900 Zone 0’s CW data is outside the settable
range (--1,073,741,823 to
1,073,741,823).
Zone 0 CCW
error
1901 Zone 0’s CCW data is outside the
settable range (--1,073,741,823 to
1,073,741,823).
Zone 1 CW
error
1910 Zone 1’s CW data is outside the settable
range (--1,073,741,823 to
1,073,741,823).
Zone 1 CCW
error
1911 Zone 1’s CCW data is outside the
settable range (--1,073,741,823 to
1,073,741,823).
Zone 2 CW
error
1920 Zone 2’s CW data is outside the settable
range (--1,073,741,823 to
1,073,741,823).
Zone 2 CCW
error
1921 Zone 2’s CCW data is outside the
settable range (--1,073,741,823 to
1,073,741,823).
Position data Target position
error
2000
to
2099
The position data is outside the settable
range (--1,073,741,823 to
1,073,741,823).
(The last two digits of the code indicate
the position data number where the error
occurred.)