Mitsubishi A1SD75P1-S3, User Manual

Page: 65 / 622

3 - 14
MELSEC-A
3 SPECIFICATIONS AND FUNCTIONS
Important
*1 When position control of movement amount 0 is executed, the BUSY signal also turns ON.
However, since the ON time is short, the ON status may not be detected in the sequence
program.
*2 AD75 positioning complete refers to when the output of pulses from AD75 is completed.
Thus, even if the AD75 positioning complete signal turns ON, the system may continue to
operate.
*3 If WDT error occurs, status of I/O signals cannot be checked by the monitor function of GX
Configurator-AP.
To check the status of WDT error by the AD75 READY signal [X0], use the device monitor
of GX Developer.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com