Mitsubishi A1SD75P1-S3, User Manual

Page: 203 / 622

5 - 106
MELSEC-A
5 DATA USED FOR POSITIONING CONTROL
5.7 List of control data
5.7.1 System control data
Setting item Setting details
Cd.1 Clock data setting (hour)
•
The clock data (hour) from the PLC CPU is set after the AD75 power is turned
ON.
Cd.2 Clock data setting (minute,
second)
•
The clock data (minute, second) from the PLC CPU is set after the AD75 power
is turned ON.
Cd.3 Clock data writing
•
After setting the clock data in Cd.1 and Cd.2 , when setting the data in
Md.5 and Md.6 as the AD75 clock data, set "1".
•
When the setting is completed, the OS sets "0".
Cd.4 Target axis* •
Set the axis targeted for reading or writing.
* Cd.4 to Cd.8 are data used to transmit the positioning data between the OS memory and buffer memory.
(Refer to section "7.2 Data transmission process".)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com