Mitsubishi A1SD75P1-S3, User Manual

Page: 486 / 622

12 - 73
MELSEC-A
12 CONTROL AUXILIARY FUNCTIONS
(2) Precautions during control
(a) A command in-position width check will not be carried out during speed
control or controlling speed of speed/position changeover control.
Command in-position flag
[ Md. 40 Status: b2]
Speed to position changeover
t
Positioning
control start
Speed/position
changeover
control start
Command in-position
width setting value
V
Execution of the command in-position width check
OFF
ON
Command in-position
width setting value
Execution of the command in-position
width check
Fig. 12.38 Command in-position width check
(b) The command in-position flag will be turned OFF in the following cases.
("0" will be stored in " Md.40 Status: b2".)
•
At the positioning control start
•
At the speed control start
•
At the zero point return control start
•
At the JOG operation start
•
When the manual pulse generator operation is enabled.
(c) The " Pr.17 Command in-position width" and command in-position flag
( Md.40 Status: b2) of the reference axis are used during interpolation
control.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com