Mitsubishi A1SD75P1-S3, User Manual

Page: 172 / 622

5 - 75
MELSEC-A
5 DATA USED FOR POSITIONING CONTROL
Da.13 Parameter
Set the value as required for " Da.12 Special start command".
Da.12 Special start command Setting value Setting details
Block start (Normal start) – Not used. (There is no need to set.)
Condition start
Wait start
Simultaneous start
1 to 10
Set the condition data No. (No. of
"condition data" set to perform
condition judgment)
(For details of the condition data, refer
to Section 5.5.)
Stop – Not used. (There is no need to set.)
Repeated start (FOR loop) 0 to 255 Set the No. of repetitions.
Repeated start (FOR condition) 1 to 10
Set the condition data No. (No. of
"condition data" set to perform
condition judgment)
(For details of the condition data, refer
to Section 5.5.)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com