Mitsubishi A1SD75P1-S3, User Manual

Page: 396 / 622

11 - 9
MELSEC-A
11 MANUAL CONTROL
Setting item Setting requirement
Factory-set initial value
(setting details)
Pr.26 Acceleration time 1 (Unit: ms)
1000
Pr.27 Acceleration time 2 (Unit: ms) 1000
Pr.28 Acceleration time 3 (Unit: ms) 1000
Pr.29 Deceleration time 1 (Unit: ms)
1000
Pr.30 Deceleration time 2 (Unit: ms) 1000
Pr.31 Deceleration time 3 (Unit: ms) 1000
Pr.32 JOG speed limit value 2000
Pr.33 JOG operation acceleration time selection
0 (acceleration time 0)
Pr.34 JOG operation deceleration time selection 0 (deceleration time 0)
Pr.35 Acceleration/deceleration process selection
0 (automatic trapezoidal
acceleration/deceleration
processing)
Pr.36 S-curve ratio 100
Pr.37 Sudden stop deceleration time 1000
Pr.38 Stop group 1 sudden stop selection
0 (deceleration stop)
Pr.39 Stop group 2 sudden stop selection 0 (deceleration stop)
Pr.40 Stop group 3 sudden stop selection 0 (deceleration stop)
Param
eters
Pr.43 External start function selection 0 (positioning start)
: Setting always required.
: Set according to requirements (Leave set to the initial value when not used.)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com