Mitsubishi A1SD75P1-S3, User Manual

Page: 220 / 622

5 - 123
MELSEC-A
5 DATA USED FOR POSITIONING CONTROL
Storage buffer
memory address
Setting value Default value
Axis 1 Axis 2 Axis 3
Set with a decimal.
K 1
Continuous operation interrupt request
Setting value
After the control interrupt request is accepted, "0" is stored by the OS.
(Indicates that the continuous operation interrupt request is completed.)
1: Interrupt continuous control or continuous
path control. (Set by sequence program)
0 1181 1231 1281
0
1184
1185 1234
1235 1284
1285 Set with a decimal.
Setting value
To set "60000ms" for the "
New acceleration time value", set
"60000" in the buffer memory.
Example)
Cd.33
Cd.33
New acceleration time value
Cd.34
New deceleration time value
0
1186
1187 1236
1237 1286
1287
Set with a decimal.
K
Acceleration/deceleration time change during
speed change, enable/disable selection
Setting value
1: Enable acceleration/deceleration time
change
Other than 1: Disable acceleration/
deceleration time change
0 1188 1238 1288
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com