Mitsubishi A1SD75P1-S3, User Manual

Page: 507 / 622

13 - 8
MELSEC-A
13 COMMON FUNCTIONS
(2) Display details
The details displayed in the LED display area are classified into several types of
information (called "modes"). The following types of information are displayed
according to the various modes on the "17-segment LED display" and "axis
display LED".
(The display is changed over by the "mode switch". Refer to section "(3)
Changing the display details" for more information.)
(a) List of display details
Mode 17-segment LED display Axis display LED
When there is no error
One of the following is displayed.
RUN (during operation)
The display of the axis in
operation is in operation blinks.
TEST (during a test mode)
The displays of all axes are in
operation blinks.
IDL (standing by) OFF
When an error occurs
Operation monitor 1
The following is displayed.
Display: ERR
The LED of the axis in which
the error occurred is flickering.
Operation monitor 2
The operation status is displayed for
the axis whose axis display LED is lit. The AXn display changes over
every 0.5 seconds.
Internal information 1
The OS type information is displayed.
Display: S003
OFF
Internal information 2
The OS version is displayed.
Display: V
OFF
Input/output
information n The signal name designated by the
mode switch is displayed. Lights when the selected signal is
ON.
Stepping motor mode STMM display
The stepping motor mode axis
display is lit.
REMARK
The "OS type" appears in the LED display area for 1 second after the PLC power is
turned ON, then the "operation monitor 1" display appears.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com