Mitsubishi A1SD75P1-S3, User Manual

Page: 240 / 622

6 - 19
MELSEC-A
6 SEQUENCE PROGRAM USED FOR POSITIONING CONTROL
*
*
*
No.20 Continuous operation interrupt program
<Continuous operation interrupt command pulse>
<Continuous operation interrupt write>
<Restart command pulse>
<Axis status read>
<Restart command ON during stop>
<Restart request write>
<Restart complete read>
<Restart command storage OFF>
<Parameter initialization command pulse>
<Parameter initialization command hold>
<PLC READY output to AD75 standby>
<Parameter initialization write>
<Parameter initialization complete read>
<Parameter initialization command storage OFF>
<Flash ROM write command pulse>
<Flash ROM write command hold>
<PLC READY output to AD75 standby>
<Flash ROM write request write>
<Flash ROM write complete read>
<Flash ROM write command storage OFF>
*
*
*
No.21 Restart program
*
*
*
No.22 Parameter initialization program
*
*
*
No.23 Flash ROM write program
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com