IBM PC Server 325, User Handbook Manual

Page: 41 / 288

Using the Configuration/Setup Utility Main Menu
The result of pressing the power switch varies, depending on which
mode the server is in. To toggle from
Ÿ Standby mode to Attended mode, press and release the power
switch.
Ÿ Attended mode to Standby mode, press the power switch in
slowly just until the power-on light goes out and then
immediately release the switch.
Ÿ Unattended mode to Attended mode, press and release the
power switch. The server restarts in Attended mode.
Ÿ Unattended mode to Standby mode, press the power switch just
until the power LEDs go out.
Notes:
1. For proper operation of the Alarm/Wakeup Settings options, set
the Password Prompt choice to Off. On receiving a signal for
an unattended startup, the server bypasses the password
prompt and continues the startup.
2. Set the Wakeup features immediately before you plan to turn off
the server. The server locks and cannot be used after you exit,
saving the settings. When the server restarts, in either Attended
or Unattended mode, the Wakeup features return to the default,
disabled, setting.
3. When both wakeup features are enabled, the server starts when
the first event (time or signal) occurs.
The Alarm/Wakeup Settings choice appears only on the full
Configuration/Setup menu.
Wakeup Timer
With this option, you can specify a time and date when the server
will turn on automatically.
To set the Unattended mode, select Alarm/Wakeup Settings, then
select Wakeup Timer. Then, set or change the settings. Select
Wakeup Date
to specify a date up to 31 days away. Select Wakeup
Time to specify the time, using a 24-hour clock format.
Chapter 2. Configuring Your Server
27