IBM PC Server 325, User Handbook Manual

Page: 173 / 288

Ethernet Controller Messages
PCNTW-DOS-7 You need another PCNTNW MLID Section Heading in the
NET.CFG file in order to load the MLID again.
Explanation: You tried to load the PCNTNW MLID a second time. Normally, you
would do this so that you could use two or more Ethernet controllers in the server.
When two or more of the same type of Ethernet controllers are installed in the server,
an associated PCNTNW MLID section heading must be specified in the NET.CFG
file.
Action: Create a NET.CFG file and add the commands for both PCNTNW MLID
boards to the file. Then, restart the server.
PCNTNW-DOS-8 A NET.CFG is required to load the MLID again.
Explanation: You tried to load the PCNTNW MLID a second time. Normally, you
would do this so that you could use two or more Ethernet controllers in the server.
When two or more of the same type of Ethernet controllers are installed in the server,
an associated PCNTNW MLID section heading must be specified in the NET.CFG
file.
Action: Create a NET.CFG file and add the commands for both PCNTNW MLID
boards to the file. Then, restart the server.
PCNTNW-DOS-9 The NET.CFG entry has been ignored.
Explanation: The PCNTNW ignored the NET.CFG entry.
Action: Verify that the entries in the NET.CFG file are correct.
The PCNTNW MLID has been successfully removed.
Explanation: A request was made to unload a PCNTNW MLID. The PCNTNW
MLID has been removed from memory.
Action: None.
PCNTNW-DOS-11 The MLID does not support frame
<
string:
>
. The PROTOCOL
keyword has been ignored.
Explanation: The NET.CFG files specified the PROTOCOL option for a PCNTNW
MLID. The specified frame type is not supported by the PCNTNW MLID.
Action: Check the PROTOCOL line in the NET.CFG file for possible omissions of
required dashes and underscores or any misspellings.
Chapter 4. Solving Problems
159