IBM PC Server 325, User Handbook Manual, Page: 247 / 288

Preparing a Tower Model for Rack Installation
5. Use a screwdriver to pry loose the operator LED panel from the
front bezel; then remove it. If necessary, pull gently on the
panel's cable to pull it through the hole on the front of the
server.
6. Remove the front bezel.
a. Remove the three screws on each side of the rear edge of
the front bezel.
b. Pull on the front bezel to remove it.
c. Remove the speaker from the back of the bezel. Set the
speaker and screws aside; you will reinstall them in step 10d
on page 235.
d. Store the bezel in a safe place.
Appendix D. Installing a PC Server 325 in a Server Rack
233