IBM PC Server 325, User Handbook Manual

Page: 144 / 288

About the Test Programs
configuration check. The diagnostic program then runs the
tests for each of the devices or modules found during the
configuration check. Upon completion of the Quick Check,
you are prompted to
Press any key to continue.
Pressing any key then returns you to the Diagnostics Menu.
– Module Tests more rigorously test an individual module (or
device such as a diskette drive) or specify a group of tests
for several modules. In addition, you can specify how many
times to run an individual test and how the test program
will note and log any errors that it finds. See “Using the
Module Tests” on page 136 for more information about
running the module tests.
– Options sets or changes defaults that affect the reporting,
error logging, and presentation of the error information. For
more information about the options available, see “Test
Options” on page 138.
Ÿ System Info : When you select this choice from the Main Menu,
the System Info Menu appears. From the System Info Menu,
you can view the server's hardware and software configuration
information. For example, you can view the IRQ and DMA
assignments, memory usage, address and attribute information
for device drivers, and so on.
Ÿ
Reports : When you select this choice from the Main Menu, the
Reports Menu appears. From the Reports Menu, you can print
the system information.
Ÿ
Utilities : When you select this choice from the Main Menu, the
Utilities Menu appears. The Utilities Menu provides access to
additional programs on the Diagnostic Diskette. These utility
programs include: RAM Chip Locator, File Editor, and Format
Diskette. For more information about the File Editor, see “Using
the File Editor” on page 194.
Ÿ Exit
: Select this choice to exit from the Diagnostic Diskette.
130
PC Server 325 User's Handbook