IBM PC Server 325, User Handbook Manual, Page: 252 / 288

Installing the Drawer Model in a Rack
2. Attach the cable arm bracket to the rear of the server.
a. Align the cable arm bracket with the holes on the sides of
the fan, keeping the longer, angled arm of the bracket
toward the middle of the server.
b. Attach the bracket with four 8-32 by 0.325-inch screws.
3. Attach the inner slide section of each slide rail to the side of the
server.
a. Pull the inner slide until the safety latch locks.
b. Press the safety latch; then, pull the inner slide firmly until
it detaches from the outer slide rail.
238
PC Server 325 User's Handbook