IBM PC Server 325, User Handbook Manual, Page: 194 / 288

Troubleshooting
Keyboard, Mouse,
or Pointing-
Device Problems
Action
All or some keys on the
keyboard do not work. 1. Make sure the keyboard cable is properly
connected to the system.
2. Make sure the system and the monitor are turned
on.
If the items above are correct, have the system serviced.
The mouse or pointing
device does not work. Verify that the mouse or pointing-device cable is
securely connected and the device drivers are installed
correctly.
If the problem recurs, have the server and the device
serviced.
Memory Problems Action
The amount of memory
displayed is less than the
amount of memory
installed. Verify that:
1. The memory-module kits are seated properly.
2. You have installed the correct type of memory (see
“Working with Memory-Module Kits” on page 70).
3. If you changed the memory, you updated the
memory configuration in the Configuration/Setup
Utility program.
If the above items are correct, run the memory test
program from the System Board Diagnostic Diskette.
The system might have detected a bad memory module
and automatically reallocated memory to enable you to
continue to operate. If the memory tests fail, have the
system serviced.
180
PC Server 325 User's Handbook